DB Fourth Floor
Design Building Fourth Floor

Instructions: Click on any panorama to load the interactive viewer. You can then explore the image by click/tap-dragging in it (this even works on your phone/tablet). To make individual images full-screen use the icon directly below the zoom buttons (currently not supported on Apple mobile devices).

This is at the topmost N-W corner of the building in the studio area. Aside from the amazing view, you can see the pre-glued wood-concrete composite connectors in the CLT slabs and the steel plate edging that will serve as pour stop for the concrete floor topping. Before concrete is poured, a 1 inch thick layer of insulation will be installed on top of the CLT to provide for sound dampening.

Taken in the center of the fourth floor studio area, this view shows the sloping CLT ceiling, the wood-concrete composite floor connectors (note the spacing increase towards the edges of the plates), and the fourth-floor extension of the CLT shaft walls.

This interior view was taken at the edge of the fourth-floor mezzanine and shows the open view towards the third floor studios. At the edge of the floor slab, you can already see the steel pour-stop edging.

Back to overview